Address
No. 3F07, Tao Cube, No.68, CCIH, Jihua West Road,Chancheng District, Foshan City, Guangdong, China.
20mm outdoor porcelain systems
Application ideas for pavers that have to work outside.
Use this page as a project selector for 20mm outdoor porcelain tile: garden paving, pool decks, raised terraces, rooftops, driveways, and exterior cover walls. The photos are clean scene references; the construction notes and tables are rewritten as web-readable guidance for buyers and contractors.
| Application route | Best use | Main value |
|---|---|---|
| Dry lay | Grass, gravel, sand | Fast removable installation for gardens, paths, patios, and low-traffic outdoor areas. |
| Raised floor | Pedestal system | Drainage, service access, and slope correction for rooftops, balconies, and terraces. |
| Wet zones | Pool and resort deck | R11 surface, drainage planning, coping details, and edge trims for barefoot areas. |
| Engineered base | Driveway and facade | Project-specific load or fixing design for vehicle floors and cover wall systems. |
Choose by application
| Project area | Recommended system | What it solves |
|---|---|---|
| Garden path | Grass, sand, or gravel dry lay | Fast installation, removable slabs, natural outdoor look |
| Patio or courtyard | Gravel bed or exterior mortar bed | Stable floor for furniture, dining areas, and small commercial yards |
| Terrace or balcony | Raised pedestal system | Drainage, waterproofing access, and small height adjustment |
| Rooftop | Raised floor over waterproofing | Service cavity, membrane protection, and clean finish |
| Pool deck | R11 textured paver with drainage and edge planning | Anti-slip walking surface and overflow compatibility |
| Driveway | Engineered compacted base | Load-bearing outdoor paving for light vehicles |
| Exterior cover wall | Ventilated dry cladding system | Stone-look facade with replaceable porcelain panels |
Garden path and patio paving
Dry laying is the simplest way to use 20mm porcelain outside. It works for villas, restaurant patios, garden paths, and courtyard walkways where the buyer wants a clean stone look without a full wet installation.
- Use compacted and level base layers.
- Keep slabs supported to avoid rocking.
- Best for pedestrian and furniture loads.
Pool deck and resort areas
Pool areas need anti-slip texture, drainage, edge planning, and chemical resistance. Keep the page copy as guidance and request project data for commercial pools.
- Specify R11 textured matt surface.
- Plan coping and overflow channels early.
- Avoid glossy surfaces around wet zones.
Raised pedestal floors
Pedestal systems lift the paver above the base, leaving a space for drainage, pipe access, and waterproofing inspection. This is the most useful application for rooftops, balconies, and high-end terraces.
For raised floors above ground level, confirm pedestal spacing, wind uplift, edge restraint, and impact risk with a qualified project engineer.
Dry lay on grass
Cut the grass and soil to the required depth, level the bed, compact the base, then place the paver with full support underneath.
Dry lay on gravel
Use a stable aggregate layer with good drainage. This method is useful for paths, patios, and landscape areas where removable slabs are preferred.
Inspection access
Raised floors can leave room for drainage, waterproofing checks, and service lines when the support layout is correctly designed.
Raised floor technical checklist
| Check | Why it matters |
|---|---|
| Pedestal spacing | Controls tile support and point-load behavior. |
| Wind uplift | Outdoor raised floors above ground level can be affected by wind. |
| Edge restraint | Prevents perimeter movement and improves safety. |
| Drainage slope | Prevents standing water below the raised floor. |
| Inspection access | Allows later maintenance of waterproofing and service lines. |
Driveway and carriageable floors
20mm porcelain can be used for light vehicle areas only when the base system is engineered for the expected load. The tile matters, but the base design matters just as much.
Cover wall and facade ideas
Stone-look porcelain can be used for exterior cover wall systems with mechanical fixing. Fixing method, panel size, wind load, and building height must be designed per project.
Procurement checklist
| Before ordering | Confirm this with the buyer or contractor |
|---|---|
| Size | 600x600x20mm or 600x1200x20mm |
| Surface | R11 textured matt for wet outdoor use |
| Application | Garden, patio, pool deck, rooftop, driveway, or wall system |
| Installation | Grass, gravel, sand, pedestal, mortar bed, or engineered base |
| Accessories | Stair pieces, edge trims, pedestal clips, coping details |
| Documents | Packing list, loading quantity, technical data, and sample confirmation |
Match the application to the right paver.
Browse the 20mm Outdoor Tile collection, then send us your installation method, target market, and quantity for FOB quotation support.